Color rubber and plastic insulation material
Stance Cass1 color rubber and plastic insulation material uses nitrile rubber as the base material, adopts Stence's proprietary nano-micro-foaming technology, and is processed by a unique formula and process to have a completely closed foam rubber and plastic insulation material. The product has more uniform foaming and finer cells, which can effectively reduce the loss of cold and heat, has a lower thermal conductivity, excellent resistance to water vapor penetration, outstanding environmental protection technology, and good fire performance. Colored rubber and plastic products are divided into pipes and plates, with various colors and beautiful appearance. Various colors can be used to realize the visual management of different process divisions, and improve the visual effect and management benefit of the project.
Product advantages
● High fire safety performance
Stans B1 grade color rubber and plastic products' fire performance fully meets the national standard GB8627
The requirements of the flame retardant B1 level and above specified in the Law. Using a unique environmentally friendly formula, the material is dense when it is burning
The degree is small, it will not produce harmful smoke when burning
● Stence proprietary nano-micro-foaming technology, low thermal conductivity
Stans color rubber and plastic heat insulation material uses Stence's proprietary nano-micro-foaming technology to make the inside of the material fine.
The structure of the small airbag; the internal structure of the completely closed bubble makes the thermal conductivity coefficient lower and more stable, and the long-term use of the energy-saving effect is obvious
Obvious.
● Environmental protection and health, better indoor air quality
The product is non-toxic, odor-free, fiber-free, dust-free, free of harmful substances such as formaldehyde and HCFC, and volatile concentration of organic matter
Low, to ensure better indoor air quality
● High-grade appearance, uniform and beautiful
Colored rubber and plastic insulation materials have various colors, beautiful appearance, no need to decorate the exterior, and can be used in a variety of colors to achieve
The visual management of the same process area enhances the overall effect of the project.
● Easy and fast installation
The material is soft, the color is customized, and the construction and installation are simple.
Product Technical Index
Technical index of color rubber and plastic insulation material
Performance index of formaldehyde-free glass
| Performance of the project | Performance indicators | To comply with the standard | |
|---|---|---|---|
| The density of performance | 40-65kg/m³ | GB/T 17794 | |
| Oxygen index | ≥34% | GB/T 8624 | |
| Smoke density | ＜49% | ||
| Combustion performance | Flame retardant B1 level | GB/T 8624 | |
| Coefficient of thermal conductivity | -20℃时《0.032W/(m.k) | ||
| 0℃时《0.032W(m.k) | |||
| 40℃时《0.036W(m.k) | GB/T 17794 | ||
| Moisture permeability | Moisture permeability coefficient | ≤1.9x10-g/(m.s.pa) | |
| The wet resistance factor | ≥10000 | GB/T 17146 | |
| Vacuum water absorption | ≤4% | GB/T 17794 | |
| Tear strength water ratio | ≥7N/cm | GB/T 10808 | |
| Compression resilience（The compression ratio50%，72h） | ≥80% | GB/T 17794 | |
| Aging resistance,150h | Slight wrinkling, no cracks, no pinholes, no deformation | GB/T 16259 | |
| Applicable temperature range | -50%~105℃ | GB/T 17794 | |
